BSH B20CS50, Руководство по обслуживанию

Страница: 69 / 77

68
10-3. Refrigerator Leveling & Door Adjustment
In case freezer door is lower than refrigerator door
1
Insert a screw driver (flat tip) into a
groove of the left wheel (bottom of
freezer) and turn it clockwise until
the door is balanced.
(clockwise to raise freezer door ;
counterclockwise to lower)
Unless the freezer door is balanced
by step 1, then follow the next
steps.
2
Open the doors, unscrew the front
cover and remove, if it is attached.
3
Loosen 3 hinge bolts(1 on the left
+ 2 on the right) a little.
(Do not unfasten them completely.)
Insert a hexagonal wrench into the
groove of adjusting
nut and turn clockwise until the door
is level.
※
Refrigerator must be level in order to maintain optimal performance and desirable front appearance.
(If the floor beneath the refrigerator is uneven, freezer and refrigerator doors look unbalanced.)
4
Once the door is balanced, fasten
the hinge bolts tightly and screw
the front cover.
In case refrigerator door is lower than freezer door
1
Insert a screw driver (flat tip) into a
groove of the right wheel (bottom of
refrigerator) and turn it clockwise
until the door is balanced.
(clockwise to raise refrigerator door ;
counterclockwise to lower)
2
Loosen 3 hinge bolts(2 on the left
+ 1 on the right) a little.
(Do not unfasten them completely.)
Insert a hexagonal wrench into the
groove of adjusting nut and turn
clockwise until the door is level.
3
Once the door is balanced, fasten
the hinge bolts tightly.
※
Unless the refrigerator door is
balanced by step 1, then follow the
next steps.
After installation and/or door leveling, fasten front cover
with screws. (Remove the screws on the front bottom
panel first. Click and screw the cover)
Front Cover
The front of refrigerator needs to be higher just a little than the back for easy
door closing, but if the wheel is raised too much for door balance, i.e. front of
refrigerator is too higher than the back, it can be difficult to open the door.
Caution