BSD BSD-9300L, Руководство по эксплуатации и обслуживанию

Страница: 5 / 20

BSD-9500L/P Series

caught in moving parts
g) If devices are provided for the connection of dust extraction and collection
facilitys, ensure these are connected and properly used.
Use of these devices can
reduce dust related hazards.
4) Power tool Use and Care
a) Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use power tool if switch does not turn it on or off. Any power tool that cannot
be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing the power tools.
Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many accidents are
cause by poorly maintained power tools.
f) Keep cutting tools sharp and clean . Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the power tools, accessories and tool bits ect., in accordance with these
instructions and in the manner intended for the particular type of power tool,
taking into account the working conditions and the work to be performed. Use of
the power tool for operations different from intended could result in a hazardous situation.
5) SERVICE
a)
Have your power tool serviced by qualified repair person using only indentical
replacement parts , This will ensure that the safety of the power tool is maintained.
Additional information shall be provide
a) Instruction for putting into use.
1. Setting-up or fixing power tool in a stable position as appropriate for power tools which
can be mounted on a support.
2. Assembly.
3. Connection to power supply, cabling, fusing, socket type and earthing requirements.
4. Illustrated description of functions.
5. Limitations on ambient conditions.
6. List of contents.
b) Operating Instructions.
1. Setting and testing.
2. Tool changing.
3. Clamping of work.
4. Limits on size of work piece.
5. General instructions for use.
c) Maintenance and servicing.
1. Regular cleaning, maintenance, and lubrication.
2. Servicing by manufacture or agent, list of addresses.
3. List of user-replaceable parts.
4. Special tools which may be required.