BSD-Racing BS805T, Инструкция по эксплуатации

Страница: 3 / 16

1.Please assemble and install this car without children’s reach.As it includes small
and sharp parts.
2.Do not run the car on public street or highways.As it might cause serious acci-
-dents,personal injuries and property damage etc.
3.During the middle of racing and after operation,the engine and exhaust will become
HOT.Therefore please do not touch them before cooling down.
4.Please make sure everyone is using different frequencies while racing the car in the
same area.
02
Please read the instruction carefully before starting the assembly.
Install eight "AA" batteries into transmitter,making
sure the polarity is correct.
Insert the antenna into the top of the transmitter and
tighten the screw.
Turn the transmitter on and check the battery light.
If all LED's light up,the batteries are acceptable.If
only the red LED lights up,immediately replace the
batteries.
- +
AA
-
AA
+
+
AA
-
-
AA
+
+
AA
-
-
AA
+
+
AA
-
+
AA
-
Without permission, any company, business or user shall not change the frequency, nor increase
the capacity, nor modify the original characteristics or functions once this low frequency radio is
granted type approval certificate.
The usage of the low frequency radio shall not affect aviation safety or disturb legal communications.
Once found, it shall be stopped, and must be improved until this impact is eliminated.
The legal communications aforementioned refer to radio-communication under the
telecommunications act.
Low frequency radios must submit to disturbance produced by legal communications, and
radio-wave radiation generated by industrial, scientific and medical equipments.
TRANSMITTER PREPARATION