25
Instructions for use
In order to ensure a lasting function of the
floor socket, the following instructions must
be observed:
• Connection, repair or maintenance must be carried
out by a trained specialist. During installation and
commissioning gloves must be worn.
• For the installation of the floor socket, a solid
surface (for example screed, concrete, raised floor)
must be present.
• When installing on an unpaved surface, the floor
socket is not walkable.
• The connecting cable must have a cross-section
in accordance with the VDE regulation. In addition,
flexible cables must be used so that the degree of
protection can be guaranteed.
• If cable glands are used, they should be suitable for
the corresponding cable cross-section and have an
appropriate degree of protection.
• The specified degree of protection can only be
guaranteed in the perfect, closed and unused
condition of the floor socket.
• Despite manufacturing inspection, sharp edges or
corners on housings, lids, or other components
may occur during the manufacturing process.
• In the case of mechanical damage or other defects
(technical/electrical), it is not allowed to put the
product into operation.
• The product is in compliance with the national
regulations to dispose.
Additionally applies to the 9902A:
• The covering glued into the lid must have a height
that enables unrestricted use of the product. The
maximum height of the flooring is 5 mm.
•
Care instructions:
The product is suitable for dry
care (liquid-free or low-liquid (mist-moist) cleaning
methods are used). In addition,
no acid-, chloride-
containing or alkaline products
may be used for
cleaning.
Additionally applies to the 9902D:
•
Care instructions:
The product is suitable for wet
care. This also includes the use of wet sweepers
in which the floor covering is briefly soaked.
In addition,
no acid-, chloride-containing or alka-
line products
may be used for cleaning.
• To ensure faultless operation, the seals must be
regularly cleaned of dirt and checked for perfect
condition.
Errors and technical changes reserved.
