background image

17

Power OFF . . . . . . . . . . . .000
TV/SAT ............................001
DVD .................................002
CD ...................................003
AUX .................................004
VCR .................................005
TAPE . . . . . . . . . . . . . . . .006
Volume UP. . . . . . . . . . . .007
Volume DOWN . . . . . . . . .008
MUTE (toggle)

3

  . . . . . . . .009

TEST ................................010
DIGITAL ...........................011
DOLBY. . . . . . . . . . . . . . .012
STEREO. . . . . . . . . . . . . .013
THX . . . . . . . . . . . . . . . . .014
POWER ON/OFF

3

 . . . . . . .015

DTS .................................016
SURROUND . . . . . . . . . . .017
MODE . . . . . . . . . . . . . . .018
MENU UP. . . . . . . . . . . . .019
MENU DOWN. . . . . . . . . .020
SELECT . . . . . . . . . . . . . .021
CENTRE. . . . . . . . . . . . . .022
REAR. . . . . . . . . . . . . . . .023
BACK. . . . . . . . . . . . . . . .024
SUB. . . . . . . . . . . . . . . . .025
SAVE . . . . . . . . . . . . . . . .026
BYPASS 2 CH ON/OFF

3

. . .027

BYPASS 6 CH ON/OFF

3

. . .028

Power ON  . . . . . . . . . . . .029
SPV-1

1

 Reserved..............030

 . . . . . . . . . . . . . . . . . . through
SPV-1 Reserved ...............048
OSD

2

 On/Off

3

. . . . . . . . . .049

OSD Off . . . . . . . . . . . . . .050
OSD On . . . . . . . . . . . . . .051
MONO . . . . . . . . . . . . . . .052
BYPASS 2 Ch ON . . . . . . .053
BYPASS 6 Ch OFF  . . . . . .054
BYPASS OFF  . . . . . . . . . .055
DIGITAL ON . . . . . . . . . . .056
DIGITAL OFF  . . . . . . . . . .057
MUTE ON. . . . . . . . . . . . .058
MUTE OFF . . . . . . . . . . . .059
BYPASS SUB TOGGLE

3

 ....060

FORCE DIGITAL ON  . . . . .061
FORCE DIGITAL OFF. . . . .062

SURROUND MODES
MODE NONE . . . . . . . . . .064 
PROLOGIC . . . . . . . . . . . .065
PLII MUSIC  . . . . . . . . . . .066
PLII MOVIE  . . . . . . . . . . .067
NEO6 MUSIC . . . . . . . . . .068
NEO6 MOVIE . . . . . . . . . .069
STEREO 5 . . . . . . . . . . . .070
PARTY . . . . . . . . . . . . . . .071  
HALL . . . . . . . . . . . . . . . .072
CHURCH . . . . . . . . . . . . .073
STADIUM . . . . . . . . . . . . .074

CLUB. . . . . . . . . . . . . . . .075
THEATRE . . . . . . . . . . . . .076  
NATURAL. . . . . . . . . . . . .077

Dynamic Range Scroll . . .090
Chatter Detect ON  . . . . . .091
Chatter Detect OFF . . . . . .092
Restore DAE5 factory settings

7

 246

Update DAE5 factory settings .247
Volume Calibration

5

. . . . .248

Turning Point 

5

. . . . . . . . .249

AUTO SAVE TOGGLE

6

  . . .250

Crossover Enable/Disable

3

  . .251 

Restore factory defaults

4

 .254

NULL . . . . . . . . . . . . . . . .255

NOTES:
1) SPV-1: Bryston Video Switcher
2) OSD:   On Screen Display
3)  On/Off or Toggle: function is 

toggled On or Off every time code 
is received.

4)  Use care in using this code as 

ALL settings will be reset to the 
factory defaults

5)  For factory and service use only; 

internally disabled

6)  For universal remote controls 

which do not have the Bryston 
SP2 remote’s SAVE button, this 
allows settings entered via the 
remote to be saved automatically 
without having to press the SAVE 
button.

7)  Use care in using this code as 

all DAE-5 (Digital Audio Engine 
or DSP module) settings will be 
reset to the factory defaults

SP2 SPECIFICATIONS

I

NPUTS

Analog AudIo: 

Six stereo (RCA) pairs, One 5.1 channel (RCA) input 

Digital:    

 4 coaxial (RCA) 75 Ohms, 2 Optical (TOSLINK?), conforms to 

SPDIF standard. 

 

Pro version 1 AES/EBU input (XLR) 110 Ohms 

Infrared: 

1 mini (1/8”) phone jack 

RS-232: 

D9 connector (bidirectional) 

 

OUTPUTS

 

Analog Outputs:  

 Left, Centre, Right, Right Surround, Left Surround, and 

Subwoofer on 6 unbalanced 

 

(RCA) and 6 balanced (XLR). 

 

2 stereo (RCA) pairs of Record Outputs. 

 

1 pair (RCA) Surround Back outputs 

Trigger: 

  One 12V on/off trigger, One 12V programmable trigger, to 

source 80mA total. 

Serial Data: 

(for video switcher): 1 mini (1/8”) phone jack

INFRA-RED REMOTE CONTROL

Number of buttons 

30

Power Source 

two AAA batteries

 

PERFORMANCE SPECIFICATIONS

A/D Conversion:  

24-Bit, 48kHz Delta-Sigma 

D/A Conversion:  

24-Bit, up to 96kHz Delta-Sigma 

DSP Engine:  

TI Aureus

Power Supply:  

Dual, Linear, Toroidal 

Frequency Response:  20Hz to 20kHz +/- 0.25 dB 

THD+Noise: 

 Less than 0.006% in DSP modes; Less than 0.0025% in 

Bypass mode  20Hz to 20kHz at maximum output level. 

Signal-to-Noise Ratio:   105dB in DSP Modes; 110dB in 2ch Bypass Mode ; 22kHz 

bandwidth, Ref. 1kHz at maximum output level 

Input Level:  

2 Vrms in DSP modes; 4 Vrms in Bypass Mode 

Input Impedance:  

50kOhms 

Output Level:  

 8 Vrms (16 Vrms Balanced) in DSP Modes; 10 Vrms (20 

Vrms Balanced) in Bypass Mode. 

Output Impedance:   110 Ohms 

Bass Management:    2nd Order HP filter(x5), 4th Order LP filter 40 – 200 Hz Cross-

over Freq. 

 

PHYSICAL SPECIFICATIONS

Power Requirements   100VAC, 115VAC, and 230VAC models.  200 VA. IEC detach-

able power cord (included) 

Dimensions:  

17” W x 13.5” D x 3.8” H; rackmount 19” W x 13.5” D x 3.5” H 

Weight:  

approx 22 lbs (10 kg) 

Chassis Temp:  

50 deg Celsius max. 

Specifications subject to change without notice.

APPENDIX B:

INFRA-RED REMOTE CODES

Содержание SP2





















Отзывы: