Bryston l14B ST Скачать руководство пользователя страница 6

BRYSTON 20 -YEAR WARRANTY 

BRYSTON LTD. 

P.O. BOX 2170, 677 NEALDRIVE 

PETERBOROUGH, ONTARIO 

CANADA K9J 7Y4 

PHONE: 705-742-5325 

FAX: 705-742-0882 

 

Bryston products are warranted to be free from 
manufacturing defects for a minimum of twenty 
years from the original date of manufacture. This 
includes parts, labour and return shipping to the 
first owner and all subsequent owners. Warranty 
coverage is automatic and commences with the 
original date of manufacture which is kept on file 
at Bryston. 
 
In the event of a defect or malfunction, Bryston 
will remedy the problem by repair or replacement, 
as we deem necessary, to restore the product to 
full performance.  
 
This warranty is considered void if the defect, 
malfunction or failure of the product or any 
component part was caused by damage ( not 
resulting from a defect or malfunction ) or  abuse  
while  
in the possession of the customer. Tampering by 
persons other than factory authorized service 
personnel, or  failure to fully comply with Bryston 
operating instructions, voids the warranty. 
 
This warranty gives you specific legal rights and 
you may also have other rights which may vary 
from province to province  and country to 
country. 

 

BRYSTON SERVICE U.S.A.: 

30 COVENTRY ST. 

NEWPORT, VERMONT.  

U.S.A. 05855 

PHONE: 802- 334-1201 

FAX: 802-334-6658 

BRYSTON SERVICE CANADA: 

24 STEINWAY BLVD., UNIT 48 

ETOBICOKE, ONTARIO 

CANADA  M9W 6T8 

PHONE: 416-675-2585 

FAX: 416-675-3103 

BRYSTON SERVICE OUTSIDE NORTH AMERICA: 

CONTACT YOUR LOCAL DISTRIBUTOR  

OR 

CONTACT BRYSTON DIRECTLY 

OR   

www.bryston.ca  

Содержание l14B ST







Отзывы: