FUSES
REPLACING FUSES:
All fuses are 5mm x 20mm, time lag type and are
accessible only by removing the top cover.
CAUTION!
When replacing fuses, disconnect the power cord
and all other cables from the B60 before opening the unit!
Recommended replacement fuses:
for 100/120VAC models:
Littlefuse 218.315
Bussmann GMC-315mA
for 220-240VAC models:
Littlefuse 218.160
Bussmann GMC 160mA
POWER CONDITIONERS
B
Bryston urges caution in choosing a power conditioner for your audio/
video system. Large power amplifiers can draw very sub-
stantial current from the wall plug, and many so-called
power conditioners can in fact hinder the supply of cur-
rent by inserting resistances in series with the line cord.
However, there are now power conditioners that can
reduce or eliminate RF and ‘hash’ from the AC supply
and may actually improve current delivery to your system.
This type of power conditioner (exemplified by Bryston
B∙I∙T
Power Conditioners) uses the energy storage in
a large toroidal tranformer to provide high instantaneous
power and reduce the substantial AC output resistance of
the wall socket and house wiring. This resistance can be
in the range of 0.5 to 1 Ohm and is typically reduced to
only a few milliOhms by the Power Conditioner. That in
turn considerably reduces Voltage drop in the power line
on high current surges and quite substantially increases
the stability of the power line improving audio (and video)
focus, precision and clarity
SPECIFICATIONS:
PHYSICAL DIMENSIONS:
with 17” long C-series dress panel:
Maximum
external dimensions including feet & knobs:
17.0” x 2.75” x 11.44”
(43.2 x 7.0 x 29.1 cm)
external dimensions ~ chassis & dress panel only:
17.0” 2.25” x 10.69”
(43.2 x 5.7 x 27.2 cm)
with 19” long C-series dress panel:
Maximum
external dimensions including feet & knobs:
19.0” x 2.75” x 11.44”
(48.3 x 7.0 x 29.1 cm)
external dimensions ~ chassis & dress panel only:
17.0” 1.75” x 10.69”
(43.2 x 4.4 x 27.2 cm)
Rack mount version
:
Maximum
external dimensions including feet & knobs:
18.81” x 2.50” x 11.44”
(43.2 x 7.0 x 29.1 cm)
external dimensions ~ chassis & dress panel only:
16.81” 1.75” x 10.69” (42.7 x 4.4 x 27.2 cm)
WEIGHT:
17 lbs (7.5 kg)
PREAMPLIFIER Section:
FREQ. RESPONSE:
20Hz~20kHz +/- .05dB
MAXIMUM OUTPUT:
15 volts
IMD/THD:
<0.005% at 3 volts out
SENSITIVITY:
500mV (High level inputs)
NOISE:
-100dB
(Ref. 500mVin, 20~20K Hz)
:
ADDITIONAL SPECIFICATIONS
for BP6DA DIGITAL INPUTS:
INPUT SAMPLE RATE
: 16kHz to 108kHz.
WORD LENGTH:
16, 18, 20, 24 Bit
DATA FORMAT:
SPDIF standard
THD+N:
< 0.002%, 20Hz~20kHz
ADDITIONAL SPECIFICATIONS
for BP6P PHONO INPUTS:
THD+N:
<0.005%, IM or THD, any frequency
or combination of frequencies from
20-20kHz, at rated output or below.
NOISE:
Phono: -80dBA referred to an input
of 5 mV
RIAA ACCURACY:
Within less than +/- 0.05dB from
20~20kHz
SENSITIVITY:
5mV
Содержание BP 6
Страница 1: ...BP6 OWNER S MANUAL ...
Страница 7: ...BP6 PRE AMPLIFIERS ...
