Bryston BHA-1, Руководство пользователя

Страница: 8 / 12

part number CO-110A-11102) is included with
each unit. (see next page for hookup details)
14: STEREO MINI-JACK INPUT
A 3.5mm 3 conductor gold plated phone jack for
connecting any audio analog audio source like
MP3 players, etc. Corresponds to the “MINI”
position of the input selector switch (item #1).
15: SINGLE ENDED INPUTS
One pair of RCA jacks, gold plated, for connect-
ing line level analog audio inputs
16: BALANCED INPUTS
3 pin female XLR jacks, gold plated, for con-
necting balanced analog audio input signals
the BHA-1.
Pin 1 = ground
Pin 2 = positive phase
Pin 3 = negative phase
17: DATA PLATE LABEL
Lists the model name
(see back page for detailed descrip-
tion of model codes) ,
electrical ratings, serial number,
manufacturing date code (yyww, where the first
two digits represent the two least significant dig-
its of the year, and the last two digits represent
the week of the year).
CONNECTING THE BHA1
...
EXT HEADPHONE AMPLIFIER
to the
MPS-2 POWER SUPPLY
The BHA-1 is available without an internal power supply. These models require a Bryston MPS-2 ex-
ternal power supply and an interconnecting cable as shown below. The required cable assembly is with
the MPS-2.
When the MPS-2 is properly connected to the BHA-1 and the MPS-2 is turned on but the BHA-1 is
turned off, the BHA-1’s front panel status indicator LED will light red. This indicates that power is avail-
able to the BHA-1. Once the BHA-1 is turned on, either by the front panel On/Off switch or remotely by
via the Remote Trigger connection, the LED will light green.