2B
SST
2
DUAL CHANNEL POWER AMPLIFIER
REMOTE POWER CONTROL ~ 12 VOLT TRIGGER CONNECTOR:
The 2B
SST
2
may be powered on or off using a 12 volt A/C or D/C voltage by using the rear panel 4 position
screw terminal connector. Insert the 12 volt wires into the input labeled
‘IN’
(polarity is not important). The
power amplifier will now power on when a 12 volt trigger voltage is applied or off when removed. This same
trigger voltage is available at the connector positions labeled
‘OUT’
after the 2B
SST
2
has completely powered
up. This voltage can then be used to power another 12 volt device. This feature allows sequencing of your
power amps without large turn-on surges.
IMPORTANT
:
the front panel power switch must be
OFF
in order for the 12 volt trigger feature to work.
2B
SST
2
SPECIFICATIONS:
Power Output:
100 watts per channel into 8 ohms
Input Impedance:
10K ohms single ended (unbalanced)
15K ohms double ended (balanced)
Sensitivity:
2v setting
2 Volts in = 100 Watts into 8 ohms - gain 23 dB
1v setting
1 Volt in = 100 Watts into 8 ohms - gain 29 dB
Distortion:
THD+noise:
< 0.010% 20Hz to 20kHz at 100 watts into 8 ohms,
IMD:
< 0.010% 60Hz + 7KHz mixed 4:1
Noise:
Measured with input shorted - 20Hz to 20kHz.
>108dB below rated output (with 20Hz to 22KHz bandpass filter)
Slew Rate:
>60 volts per microsecond
Power Bandwidth:
<1 Hz to over 100 kHz
Damping Factor:
Over 500 at 20 Hz, ref. 8 ohms
Power consumption:
idle 30va, maximum power 600va
Heat load:
idle 100 btu/hr., max power 288 btu/hr
Dimensions:
Regular model: Front Panel: 17.2” x 4”
Body:
16.9” wide X 3.5” high X 15.1” deep
(depth includes front panel and protrusion of rear panel connectors)
PRO model:
Front Panel:
19” x 3.5” (2 rack units)
Body:
16.9” wide X 3.5” high X 15.1” deep
(depth includes front panel and protrusion of rear panel connectors)
Weight:
approx. 28 lbs (12.7kg.)
Содержание 2BSST2
Страница 1: ...2BSST2 OWNER S MANUAL ...
Страница 6: ...2BSST2 REAR FRONT PANEL LEGENDS ...
Страница 7: ...2BSST2 DUAL CHANNEL POWER AMPLIFIER ...