background image

Safety Warnings

Page 2

TSTATBBPQ501

CAUTION

Follow 

Installation Instructions

 carefully.

DISCONNECT POWER TO THE HEATER - 
AIR CONDITIONER BEFORE REMOVING
THE OLD THERMOSTAT AND INSTALLING
THE NEW THERMOSTAT.

WARNING

The 2 Alkaline “AA” batteries must be replaced at least 
every 12 months to assure proper operation.  
The thermostat will display the Low Battery   
code (fig. 1) on the display of the thermostat 
when it is time to replace the batteries.  If the 
thermostat is connected to 24v power, the 
Batteries may still be installed, but are not required.   

When       is displayed the batteries must be replaced 
immediately.  The manufacturer cannot be liable for 
improper operation of the thermostat if the batteries are 
not immediately replaced.

The annual battery replacement is especially critical in 
locations subject to freezing temperatures.  The 
thermostat will be unable to turn on the Heat if the 
batteries are exhausted.  

CAUTION

This device complies with Part 15 of the FCC rules.  
Operation is subject to the following 2 conditions:
(1) This device may not cause harmful interference, and (2) 
This device must accept any interference received, including 
interference that may cause undesired operation.

FIG. 1

Содержание TSTATBBPQ501






















Отзывы: