background image

PROGRAM button 
starts the 
programming 
process and moves 
you from one step to 
the next.

COPY PREVIOUS 
DAY button copies 
the previous day’s 
comfort schedule
into the current 
day’s schedule.

CHANGE DAY
button advances you 
to the next day to be 
programmed and 
advances the day 
of the week 
display.

ROOM TEMPERATURE
DISPLAY shows current 
room temperature.

TEMPERATURE SETTINGS
DISPLAY shows the 
temperature settings for
current time period.

OUTDOOR TEMPERATURE
DISPLAY shows the 
outdoor temperature.

TIME OF DAY 
DISPLAY exhibits the
time of day.

CLEAN FILTER 
INDICATOR lets you
know it is time to 
clean or replace your 
system’s air filter.

AUXILIARY HEAT 
INDICATOR is
displayed when a 
heat pump system’s 
auxiliary heat is on.

HUMIDITY
button changes
the display to
show himidity
readings and
allows you to
change humidity
settings.

VACATION button
changes temperature
and humidity set
points to lower levels
for optimum energy
efficiency while 
you’re away.

RESET FILTER
FUNCTION restarts
the timer that 
determines the next 
air filter change or 
cleaning. Ac
tivated by pressing
VACATION and
END buttons
simultaneously.

UP AND DOWN 
buttons change the
temperature and
humidity set points.
They are also used to
access outdoor 
temperature and 
indoor humidity 
levels.

FAN button chooses ON 
or AUTO fan operation.

HOLD/END button 
maintains the current
temperature settings.
Also used to end 
temperature and 
humidity programming
sequence.

SET TIME/TEMP button
allows you to enter 
the time of day and
temperature settings.

Year-Round Comfort.

Bryant’s Thermidistat

TM

Control provides enhanced, year-round comfort. By providing both

temperature and humidity control, this simple, yet powerful, device lets you take the steam out
of summer, the static out of winter and helps eliminate that annoying moisture build-up on
your windows when it’s cold outside. It’s never been quite this easy, and you’ve never had quite
this much comfort available through one control. 

Simple, Convenient Control.

Bryant puts your family’s comfort at your fingertips with simple instructions, responsive

push buttons and an easy-to-read, lighted display. Once set, the thermidistat control accurately
monitors indoor conditions and reliably meets your desired comfort levels. Plus, you have the 
convenience of temporarily bypassing your settings without disrupting your permanent
comfort schedule.

NOTE: Not all messages displayed in above illustration will appear at once in any situation.

MODE button selects OFF, HEAT,
COOL or AUTO operation. 
EMERGENCY HEAT (EHEAT) mode
is also included when the 
thermidistat control is installed
with a heat pump. 

Содержание Programmable Thermidistat













































Отзывы: