5
ACCESSORIES
ORDER NUMBER
DESCRIPTION
018---A
024---A
030---A
036---A
042---A
048---A
060---A
HC32GE229
BALL BEARING MOTOR
X
X
X
HC38GE228
BALL BEARING MOTOR
X
X
HC40GE228
BALL BEARING MOTOR
X
X
KAACH1701AAA
CRANKCASE HTR
X
X
X
KAACH1401AAA
CRANKCASE HTR
X
KAACH1601AAA
CRANKCASE HTR
X
KAACH1201AAA
CRANKCASE HTR
X
STANDARD
CRANKCASE HTR
S
KSACY0101AAA
CYCLE PROTECTOR
X
X
X
X
X
X
X
KAAFT0101AAA
FREEZE THERMOSTAT
X
X
X
X
X
X
X
KSAHS1701AAA
HARD START
X
X
X
X
X
X
X
KHAIR0101AAA
ISOLATION RELAY
X
X
X
X
X
X
X
KSALA0301410
LOW AMBIENT PSW
X
X
X
X
X
X
X
KSALA0601AAA
{
MOTORMASTER 230V
X
X
X
X
X
X
X
KHAOT0201SEC
OUTDOOR THERMOSTAT
X
X
X
X
X
X
X
KHAOT0301FST
OUTDOOR THERMOSTAT
X
X
X
X
X
X
X
KHALS0401LLS
SOLENOID VALVE
X
X
X
X
X
X
X
KHASS0606MPK* SNOW STAND RACK
X
X
X
X
X
X
KSASH0601COP
SOUND BLKT
X
X
X
X
X
X
KSASH2101COP
SOUND BLKT
X
KAACS0201PTC
START ASSIST PTC
X
X
X
X
X
X
X
KSASF0101AAA
SUPPORT FEET
X
X
X
X
X
X
X
KAATD0101TDR
TIME DELAY RELAY
X
X
X
X
X
X
X
KSATX0201PUR
TXV PURON HSO
X
X
X
KSATX0301PUR
TXV PURON HSO
X
X
KSATX0401PUR
TXV PURON HSO
X
KSATX0501PUR
TXV PURON HSO
X
x = Accessory S = Standard
* Available through RCD.
{
Required accessories include ball bearing fan motor, compressor start assist (CAP / Relay), crankcase heater, evaporator freeze stat, isolation relay, hard
shut---off TXV or liquid line solenoid valve.
ACCESSORY THERMOSTATS
THERMOSTAT / SUBBASE
PKG.
DESCRIPTION
T6---PRH01---A
Programmable Thermidistat
T6---NRH01---A
Non---programmable Thermidistat
T6---PHP01
Preferred Series Programmable HP Stat
T6---NHP01
Preferred Series Non---programmable HP Stat
T2---PHP01
Legacy Series Programmable HP Stat
T2---NHP01
Legacy Series Non---programmable HP Stat
T1---PHP01
Legacy RNC Series Programmable HP Stat
T1---NHP01
Legacy RNC Series Non---programmable HP Stat
TSTATXXSEN01---B*
Outdoor Air Temperature Sensor
TSTATXXNBP01
Backplate for Non---Programmable Thermostat
TSTATXXPBP01
Backplate for Programmable Thermostat and Thermidistat
t
Control
TSTATXXSBP01
Backplate for Standard Programmable Thermostat
TSTATXXBBP01
Backplate for Builder’s Thermostat
TSTATXXCNV10**
Thermostat Conversion Kit (4 to 5 Wire) — 10 Pack
* Outdoor temperature sensor is an accessory for all Bryant electronic thermostats, except the non---programmable air conditioner version and builder’s
thermostats. It allows the temperature at a remote location (outdoors) to be displayed on the thermostat. The outdoor air temperature sensor must be used
with the HybridHeat
t
(dual fuel) thermostat.
{
Thermostat conversion kit is a 24---vac accessory that can turn a 4---wire thermostat application into a 5---wire application. This kit can also be used to
replace a broken thermostat wire, or add an extra wire when needed.
The outdoor air temperature sensor is included with the Thermidistat Control and HybridHeat
t
(dual fuel) thermostat.
215B
