NOTE:
Read the entire instruction manual before starting the instal-
lation.
SAFETY CONSIDERATIONS
Installing and servicing heating equipment can be hazardous due to
gas and electrical components. Only trained and qualified personnel
should install, repair, or service heating equipment.
Untrained personnel can perform basic maintenance functions such as
cleaning and replacing air filters. All other operations must be
performed by trained service personnel. When working on heating
equipment, observe precautions in the literature, tags, and labels
attached to or shipped with the unit and other safety precautions that
may apply.
Follow all safety codes, including NFPA 54/ANSI Z223.1-1988,
National Fuel Gas Code. Wear safety glasses and work gloves. Have
fire extinguisher available during start-up and adjustment procedures
and service call.
Recognize safety information. This is the safety-alert symbol
.
When you see this symbol on the unit and in instructions or manuals,
be alert to the potential for personal injury.
Understand the signal word—DANGER, WARNING, or CAUTION.
These words are used with the safety-alert symbol. DANGER
identifies the most serious hazards which will result in severe personal
injury or death. WARNING signifies hazards that could result in
personal injury or death. CAUTION is used to identify unsafe
practices, which would result in minor personal injury or product and
property damage.
WARNING:
Never store anything on, near, or in contact
with, the furnace, such as:
1. Spray or aerosol cans, rags, brooms, dust mops, vacuum
cleaners, or other cleaning tools.
2. Soap powders, bleaches, waxes or other cleaning
compounds, plastic or plastic containers, gasoline, kero-
sene, cigarette lighter fluid, dry cleaning fluids, or other
volatile fluids.
3. Paint thinners and other painting compounds, paper bags
or other paper products.
Failure to follow this warning can cause corrosion of the heat
exchanger, fire, personal injury, or death.
WARNING:
The ability to properly perform maintenance
on this equipment requires certain expertise, mechanical
skills, tools, and equipment. If you do not possess these, do
not attempt to perform any maintenance on this equipment
other than those procedures recommended in the User’s
Manual. FAILURE TO FOLLOW THIS WARNING
COULD RESULT IN POSSIBLE DAMAGE TO THIS
EQUIPMENT,
SERIOUS
PERSONAL
INJURY,
OR
DEATH.
CARE AND MAINTENANCE
For continuing high performance and to minimize possible equipment
failure, it is essential that maintenance be performed annually on this
equipment. Consult your local dealer for maintenance and the
availability of a maintenance contract.
Fig. 1—Model 349HAZ Horizontal Furnace
A91314
service and
maintenance procedures
GAS-FIRED, INDUCED-COMBUSTION
HORIZONTAL FURNACES
Cancels:
SP04-10
SP04-15
8-15-92
349HAZ
Series B
—1—
Содержание 349HAZ
Страница 5: ...Fig 7 Wiring Diagram A91349 5 ...
