Bryan Automatic Blowdown System
Assure that your boiler has regular blow-
down on a preset schedule. The time and
duration of the blowdown period is selec-
table. Multiple sequences during a 24-hour
period can be achieved if necessary. Bryan
Boilers can provide these systems in either
manual or automatic designs.
Bryan’s complete line includes
these dependable performance
matched accessories. Design
your complete system using Bryan
components for maximum reliability
and value. For complete informa-
tion on Bryan Steam accessory
products refer to Form No. 4002.
Bryan Exhaust Heads
For oil-free and water-free
exhaust of steam. After 100
years, still the most reliable
design available. Threaded
models from 1
ⴖ
to 3
ⴖ
, as well
as flanged sizes 3
ⴖ
to 24
ⴖ
.
Horizontal Boiler Feed Systems
Available for use with any steam boiler,
both low and high pressure. Standard with
single or multiple
pumps. Special units
arranged for multiple
boiler installations.
Tanks constructed
of heavy duty steel.
systems, companion products and accessories
7
Custom Engineered Systems
Accessory
Products
Bryan Overflow Traps
Mechanical float controlled traps with cast
iron bodies, double sealed brass
valves, and
stainless steel ball
floats. Sizes from
2
ⴖ
to 6
ⴖ
for use
on pressurized
deaerators.
Bryan
Deaerators
Remove dissolved
gases from incoming
make-up water with
minimal steam loss.
Deaerate to a
maximum 005cc/liter
O2 and 0% CO2.
Spray type deaerators
available through
60,000 lb/hr. Tray type
deaerators have
stainless steel trays,
and are available in standard capacities
from 5,000 to 300,000 lb/hr.
Shell and Tube Heat Exchangers
Used for generating service hot water
and industrial applications. Available
as water-to-water or steam-to-
water exchanger, as well as with
special construction and materials
for process industries.
Packaged Boiler System
CLM Series boiler, with horizontal boiler
feed system, blowdown separator and
chemical feeder. Packaged as a complete
system on a common base, installation
is simply a matter of setting the
package in position and hooking up
utility piping and wiring.
Bryan designs, engineers and
constructs boiler and related
equipment systems, complete with
piping, wiring and controls, ready
for connection to jobsite piping
and wiring interface. Contact your
Bryan factory representative for
information and assistance.
Bryan Demand Analyzers
Program your
multiple boiler
installations for
minimizing load
swing, maximizing
efficiency and
providing even
loading on each
boiler unit by
alternating lead/lag
boiler sequence.
Auxiliary Sub-System
Bryan horizontal boiler feed system, with
chemical feeder and water conditioner, all
mounted on a common base. Performance
matched to your new boiler system or
available for retrofit.
Tray Type
Model DT-5,
5,000 PPH
Duplex Model
HFS-15-50-50-D
Heat Exchanger Type
Pool Heater
All of the features
and quality of the
time proven Bryan
“Indirect Heaters”
are now available using an
existing central boiler heating plant
as the heat source. Hot water or steam is
taken from the heating main and circulated
through the exchanger shell. The pool
water is heated as it passes through the
copper “Indirect” coil.
