You can find the address of the connector or respectively the data logger on the address sticker on the outside of the casing.
Pointers and help on how to establish a connection you can find in the enclosed SOREL connect instructions or the instructions
of the data logger.
Select a user with ‘OK’ to grant access.
To revoke access again, choose one of the users from your list and choose <remove user>.
Ethernet
The data logger‘s Ethernet connection settings can be set using this menu.
MAC Address
Displays the individual MAC address of the data logger.
Auto-Configuration (DHCP)
If auto-configuration is activated, the data logger requests IP addresses and network parameters from a DHCP server that
assigns an IP address, subnet mask, gateway IP and DNS server IP.
If you deactivate the auto configuration (DCHP), you will
have to make the required network settings manually!
IP-Address
Please refer to the router configuration for the IP address to be set.
Subnetz
Please refer to the router configuration for the subnetz to be set.
Gateway
Please refer to the router configuration for the gateway to be set.
DNS-Server
Please refer to the router configuration for the DNS server to be set.
CAN bus ID
Here you can see the ID of the controller on the CAN bus.
22
