Step 1: Attaching The Jaws
With the spring (#7) facing down
place the M10x35 bolt
(#13)through the base of the
handle and the end of the Jaws.
Secure by tightening the Lock
Nut (#25) on to the M10x35 Bolt
(#13).
See Figure 1
Step 2: Attach The Cable To The
Jaws
Attach the looped end of the
cable (#11) to the Center Bolt
on the Jaws. Put a washer on
each side of the cable as
pictured in
Figure 2
.
#13 M10x35 Bolt
#25 Lock Nut
Figure 1
#11 Cable
Washer on
each side
Step 3: Attach Cable to Locking Lever
Put the bolt end of the cable through
the Square Bolt M6 (#10) with one M6
Lock Nut (#20) on each side of the
Square Bolt. Tighten the M6 Lock Nuts
snug to the Square Bolt. Do not over
tighten.
Figure 2
Figure 3
#20 M6 Lock Nut
#10 Square Bolt
#20 M6 Lock Nut
Assembly Instructions Model BG-02