Brusa ICS115, Руководство по эксплуатации, Страница: 53 / 68

WORK STEP ILLUSTRATION / OTHER INFO
1 Ensure cautious and careful handling of the
ICS (possibly in packaging) during the
preparation for transport or storage.
Note the total weight of approx. 52 kg for the ICS. Avoid
impacts on the ICS.
2 For transport or storage, place the ICS on a
level surface.
Ensure compliance with the conditions in chapter 12.2.1 for
storage or transport of the ICS.
3 Ensure cautious and careful handling of
the ICS after transport or storage.
Note the weight of the ICS. Avoid impacts on the ICS.
Transport and storage of the CPM, see chapter 12.7.5
.
12.5.8.2 Transport and Storage of the GPM
CAUTION
Caution during transport and storage of the GPM!
Do not lift the GPM alone, rather always with a second person.
Note the technical specifications of the GPM, e.g. weight and center of gravity! Please note, that with
careless handling of the GPM, injuries are possible: injuries on GPM or packaging, as well as injuries
through allowing the GPM to fall!
Use safety shoes and protective gloves as protective equipment for handling the GPM!
Use a handcart and lashing straps as auxiliary equipment for the transport of the GPM!
WORK STEP ILLUSTRATION / OTHER INFO
1
Preparation: Determine, whether a
cautious and careful handling of the GPM
(possibly in packaging) is possible. You
thereby avoid transport damage to the
GPM. Wear the protective equipment, as
prescribed in chapter
12.4 .
Make sure, that routes for the manual transport are free (no
tripping hazards due to tools or cables lying around) and
provide sufficient space! Note the weight of approx. 49 kg for
the GPM (plus the weight of the packaging). Note the center of
gravity of the GPM in chapter
12.1.4 .
2 Lifting: Lift the GPM taking into
consideration the weight, the dimensions
and the center of gravity.
3
Handling: Ensure, that you can safely hold
the GPM during the manipulation.
Please note that the handling of the GPM (possibly in
packaging) can change during the manipulation, e.g. through
a change of the relative position of the center of gravity of the
GPM, due to contact with smooth surfaces or due to the GPM
shifting in the packaging.
53
Operation Manual
Inductive Charging System
I
CS115