17
Technical data
and startup
4
General
4.1
Content and scope of this manual
The present documentation gives the reader an overview of all required working steps in the installation and
operation of the device and the safety measures necessary for these.
Furthermore, you can find technical information, usage information and a basic description of the inverter and its
specific components.
The operation and safety instructions given in the previous chapters must be strictly adhered to ensure the ongoing
optimum functioning of the inverter and to meet the guarantee requirements of BRUSA Elektronik AG.
All work sequences and illustrations are based on the
DMC524
model and are applicable to all model versions
mentioned in this handbook. In the case of model-specific deviations, corresponding instructions are available.
4.2
Scope of the entire documentation
INFORMATION
To start up the inverter successfully, you will need the entire documentation as well as different
software and firmware. With the provision of the customer package, it is ensured that they are
complete and up-to-date. The updating of specific documents is carried out automatically and can be
seen in the history.
The customer package includes the following indexes:
Manual:
Contains all information fundamentally necessary for the installation and operation of the inverter.
Firmware / motor table:
Contains the necessary firmware, a motor specific motor parameter table and instructions for installation.
Tools:
Contains additional tools for the operation, parameter setting and maintenance of the inverter.
Debugging / calibration:
Contains additional specific documentation for further work on the inverter (e.g. error analysis, rotor offset
adjustment).
History:
Listing of all upgrades within the customer package with a specification of the affected documents or software /
firmware etc.
