Multiple SolarP
Multiple SolarP
Multiple SolarP
Multiple SolarP
Multiple SolarPor
or
or
or
ort
t
t
t
t
TM
TM
TM
TM
TM
Connections
Connections
Connections
Connections
Connections
It is possible to double the charging power by plugging more than on SolarPort together, using the
sliding male plug
(A)
on the back of the unit. Remove the rubber cap, slide the switch into it’s locking
position (Fig. 6), insert the male plug
(A)
into the female socket
(B)
of an additional SolarPort (Fig. 7).
F
F
F
F
Fr
rr
rreq
eq
eq
eq
equentl
uentl
uentl
uentl
uently Ask
y Ask
y Ask
y Ask
y Asked Ques
ed Ques
ed Ques
ed Ques
ed Questions
tions
tions
tions
tions
Q: Can the SolarPort DRAIN my battery at night?
A:
No. The SolarPort has a built-in diode for reverse current protection.
Q: Can my SolarPort be left outdoors without a protective covering?
A:
Yes. However, the SolarPort should be taken indoors in anticipation of rain, snow, etc. even though it has been weatherproofed.
Q: The green light (LED) on the panel does not light up.
A:
The green light (LED) indicates that your unit is receiving sufficient sunlight exposure. If it is not lit, it may mean that you are not exposing the
unit to enough sunlight. Properly position the solar panel to maximize its exposure to the sun. If this does not trigger the LED to work, it is
possible that the LED is burnt out. The LED may have a more limited life span than the panel. This in no way affects the performance of the
SolarPort.
Q: Can I charge more than one battery at a time with the SolarPort?
A:
Yes. The charge can be applied to a bank of “AA” batteries. When attached to a bank of 2 or more batteries, the total power input will be
divided into that number of batteries. The higher the number of batteries, the longer it will take to recharge the battery bank.
Q: What happens if I use the wrong polarity?
A:
No charging will occur. See section on Proper Adapter Connection.
Specif
Specif
Specif
Specif
Specifications
ications
ications
ications
ications
Wattage:
2.2 watts, maximum
Output Current:
Isc = 290 mA @ 7.6 volts (switched to 6V)
Isc = 145 mA @ 15.2 volts (switched to 12V)
Dimensions:
7.25” x 4.5” x 1.25” (184 mm x 114 mm x 32mm)
Weight:
11 oz. (311 g)
Temperature Range: -40
o
F to +176
o
F (-40
o
C to +80
o
C)
Male Plug (A)
Rubber Cap
Sliding Switch
Manuf
Manuf
Manuf
Manuf
Manufactur
actur
actur
actur
acturer
er
er
er
er’’’’’s W
s W
s W
s W
s War
ar
ar
ar
arr
rr
rranty & Ser
anty & Ser
anty & Ser
anty & Ser
anty & Service
vice
vice
vice
vice
Brunton warrants the SolarPort to be free of defects in materials and workmanship for a period of
one year
. The warranty extends to the original
purchaser from the date of purchase.
Should the SolarPort prove defective or need repair, contact Brunton at (307) 856-6559, or by e-mail at [email protected], to request a
Return
Authorization Number (RA#)
. Send the SolarPort to the address below, include a brief description of the problem, the RA# and proof of
purchase.
Any repair to the SolarPort must be done by Brunton or the warranty is void.
The owner will pay for freight to Brunton when repair is needed. Brunton will pay for the return freight at standard ground costs. If expedited
shipping is requested, it will be at the expense of the owner.
Brunton reserves the right to amend this warranty, or offer alternative solutions if production of the SolarPort is discontinued.
Return SolarPort
TM
& the RA# to:
BRUNTON
Warranty Department
620 East Monroe Avenue
Riverton WY, 82501
(307) 856-6559
BRUNTON
620 E. MONROE
RIVERTON, WY 82501
(307) 856-6559
WWW.BRUNTON.COM
Figure 7
Figure 6
