Page 9
www.brunton.com
ROGER 18 SERIES QUICK REFERENCE CHART
MONITOR
Pressing and holding the
MONITOR
button for 1 second will let you
hear noise so you can adjust the volume level of the radio when not
receiving a signal. This should be used to check activity on your
current channel before transmitting.
Press and hold the
MONITOR
button for 1 second again to get out
of
MONITOR
mode.
SCAN
Your R
OGER
18 Series can scan all 22 channels for
activity. To enter, quickly press the
SCAN
button. Repeat the same
procedure to exit. Your radio will rapidly scan each of the 22 channels
and stop on any active channel. Your radio will resume scanning after
4 seconds when the channel is no longer active.
When you press the
PTT
button to transmit on an active channel, the
scanning function will stop and remain on the active channel for 10
seconds before resuming scan when
PTT
button is no longer pressed.
To resume scanning, quickly press the
button.
CALL ALERT
Your R
OGER
18 Series can transmit a call alert for a fixed
length of time. To send a call alert, press the
CALL
button. The
TX
icon will appear while transmitting a call alert and a tone can be heard
on the speaker for confirmation.
The R
OGER
18 has 5 call alert selections while the R
OGER
18 CAMO
has 10 call alerts including 5
“animal sound”
call alerts - duck,
goose, turkey, owl and elk.
R
OGER 18
Series
MENU
Channel
VOX
1~22
Privacy Roger beep
On/Off
Power
H/M/L
Call Alert
1~5
Vibrate
On/Off
WX Channel
1~10
Press &
hold Menu
button
Silent Operation
On/Off
oF/1/2/3
Off
CTCSS
DCS
1~38
1~83
WX Alert
On/Off
1~10 for ROGER 18 CAMO
/
