Brunton Outdoor Inc. 1795 Dogwood Street, Louisville, CO 80027 | www.brunton.com | 800-443-4871
10232020 v.1.1
Plunge angle can then be determined by holding the back of the GEO
LITE flush against the board in the same vertical orientation (yellow
dotted line in Figure 7c) on the lineation and then by reading the red
inclinometer (labeled A in Figure 7c).
The GEO LITE can also be used to measure simultaneous trend and
plunge (Figure 7d). Level the baseplate (A in Figure 7d) while holding it
against your board (yellow dotted line in figure 7d) and align the lid
with the dipping plan (thick yellow line in figure 7d)
Then read the dial on the cover for dip angle and the appropriate end
of the needle for dip direction or dip azimuth.
Figure 13
Figure 7c
Figure 7d
A
A
