CRE-2110 OPERATOR 09-27-2021
7
CHARGING and DIAGNOSTIC CODES (under the seat)
A2
Seat in UP Position (Seat Fold Switch Closed)
A3
Seat Out of Riding Position (Swivel Limit Open)
A6
Seat Jammed (Actuator Stalled)
A7
Footrest Jammed (Actuator Stalled)
C1
Charging
C2
Off Charge
C3
Off Charge and Not Parked
C4
Parked and Charger Not Detected
C5
Battery Voltage Critical
C6
Battery Voltage Low
L1
Seat Safety Switch Open
L2
Up Limit Switch Open
L3
Down Limit Switch Open
L6
Mid-Rail Park Active
L8
Soft Stop Switch
LED
Glowing LED = charging
Keeping Stairlift Charged
Bruno curved stairlifts are powered by two 12v batter
-
ies that charge when the lift is parked tightly against the
brackets at either end of the rail. If the stairlift carriage
does not contact the upper or lower charge brackets, the
batteries will slowly drain.
Failure to keep the batteries charged, or allowing them
to fully discharge, will significantly shorten battery life.
Therefore, it is important to park the stairlift at either end
of the rail .
A yellow LED light glows on the upper and lower charge
brackets if the stairlift is correctly parked and charging.
If you cannot park at one end of the stairs (for example,
a door prevents it), use the remote control to “send” the
stairlift to the end of the rail to stay in contact with the
charge bracket. Then, use the remote to “call” the stairlift
when you need it .
Diagnostic Codes - Under the seat
