8
Assembly instructions Support frame for suspended fireplaces (1.0)
© 2015 Brunner GmbH
2. Insert the back plate
Illustr. 5: Back plate in position
Illustr. 6: Move the back plate in
place
Remove the transport securing screws on the ends of the longer beams.
Insert the back plate onto both square profiles of the left and right girder.
Remove the 8 screws (
- 1.5) – if present.
3. Adjust the height of back plate
To adjust the height of back plate, mount the
hooks and the turnbuckles of the 'top door
frame' (delivery contents of every Panorama fire-
place) onto the M10 threaded rods (
-
1.6). Put the M12 threaded rod (from part no. 9 of
the support frame assembly) into the upper holes
of the girder and through the hooks. The height
of the back plate can be adjusted by turning the
turnbuckles.
Illustr. 7: Height adjust-
ment
