Brunner EAS 2, Руководство по эксплуатации

Страница: 17 / 35

© 2017 Brunner GmbH Operating Instructions (1.14) 17
1.4 BRIGHTNESS OF BACKGROUND ILLUMI-
NATION
- Tap the ENTER button;
- press the arrow buttons, until
DISP is shown in the small numeric display;
- press the ENTER button. The value shown in the big numeric display is blinking.
You can change this value with the arrow buttons;
- confirm the selected value by pressing the ENTER button;
- close the settings by pressing the ESC button.
Factory setting: 80%
1.5 TONE SETTINGS
The loudness of hint and error messages can be set here. 2 = loud, 1 = qui-
et, 0 = silent.
- Tap the ENTER button;
- press the arrow buttons until
SUM is shown in the small numeric display;
- press ENTER, and the previously set value (e.g. 2, 1 or 0 will blink in the big nu-
meric display;
- select
2 or 1 or 0 with the arrow buttons;
- press ENTER to confirm;
- to leave the menu, press the ESC button.
Factory setting: SUM = 2