Brunetti Singleman H Скачать руководство пользователя страница 7

 

MODULATION

Input Signal

Output Signal

EFX

Output Signal

Input Signal

EFX

FILTER

SERIAL LOOP

GUITAR

IN

PRE

SEND

EFFECT

IN

MIX

POWER

OUT

OUT

RETURN

EFFECT

DIRECT

This connection is good for stomp 
effects or fx-processors that act on 
the dynamics like compressors or 
equalizers. Do not put distortion fx in 
the loop.

 

 

DIRECT=0%

GUITAR

IN

PRE

SEND

RETURN

MIX

DIRECT

IN

DIRECT

EFFECT

EFFECT=100%

MIX

OUT

POWER

OUT

EFFECT

PARALLEL LOOP

This connection is good only for 
modulation effects (chorus, phaser 
etc..) or ambient effects (delay, reverb 
etc..)

In order to achieve a great sound you 
MUST exclude the DRY SIGNAL from 
the fx-processor (by using its internal 
mixer).

GENERAL INFO ON EFFECTS & LOOP

FILTER EFFECTS

The filter effects main feature (see example) is the physical alteration of the signal wave, as a distortion pedal does.
This family of effects finds its best place between guitar and preamp input.

MODULATION EFFECTS

The modulation effects main feature (see example) is the addition or the overlapping of other curves or waves to the 
input signal. This family of effects finds its best place in connection to the effects loop, i.e. between preamp and power 
amp.

SERIAL LOOP

In the serial loop all the signal getting out of the preamp passes through the effects chain of the loop. During the 
setting of the effect you have to consider that the sound is composed by a share of the original sound (DRY) and a 
share of the processed sound (WET). They both come from the original sound and are mixed (MIX) INSIDE the effect 
processor before being sent to the outputs.

PARALLEL LOOP

In a parallel loop a share of the signal getting out of the preamp passes unaltered through the loop circuit (DRY) and 
a share reaches directly the SEND. The latter is processed by the effects, sent to the RETURN and then mixed with 
the DRY. The effect quality is less important here than in the serial loop because the original DRY signal will be not 
“colored” when it passes through the loop or the effect and the WET signal will be pleasantly added to the DRY signal.

Содержание Singleman H









Отзывы: