Bruker BMPC/2, Техническое руководство

Страница: 32 / 136

32 Z31823_00_05
Software
5.4 Operation Modes
The BMPC/2 user interface offers four different operational modes which can be
accessed by pressing the corresponding mode buttons.
Figure 5.13 Mode Buttons
5.4.1 OFF Mode
The
OFF
mode is necessary when the Administrator needs to change the software attri-
butes using the menu option
Tools
. The
Tools
menu option is only accessible when you
press the
Off
button in the toolbar. If you are logged in as User or Administrator you will
be required reenter your password to confirm the mode change.
The program can only be terminated if Off mode is selected.
i
In Off mode
no
data is written to the log files!
The alarms are deactivated in Off mode. When a magnet or BMPC/2 malfunction occurs
you will
not
be informed through an alarm!
5.4.2 Monitor Only Mode
In this mode the current values of all magnet and BMPC/2 data are displayed, but the
alarms are deactivated
. The data is saved in the Data Log File when operating in this
mode.
i
In this mode the alarms are deactivated, thus you must remember that you are not oper-
ating at the highest safety level. When a magnet or BMPC/2 malfunction occurs you will
not
be informed through an alarm!