Bruker BLAH1000 E, Руководство по эксплуатации и обслуживанию

Страница: 31 / 54

Operating & Service Manual Version 002 BRUKER BIOSPIN 31 (53)
6
Servicing the BLA 6
The BLAH1000 E Amplifier 700-900MHz provides diagnosis and servicing web
pages relies on HTTP, allowing service access with any web browser.
Accessing the BLA Amplifier 6.1
The BLAH1000 E Amplifier 700-900MHz is accessible via the BLA control board
with its IP address.
The IP address is given during " cf " by using TOPSPIN 2.5x or better software on
the workstation.
In case of problems :
•
Check the RJ45 cabling between amplifier, Ethernet switch and workstation.
•
Check the Ethernet switch power.
•
Check if the green LED on the amplifier RJ45 connector lights up.
•
Check the front panel of the amplifier, LED's indi32V, +15V, -15V and
+3.3V ON must have lit.
To access the BLAH1000 E Amplifier 700-900MHz, type " ha " in TOPSPIN 2.5x or
better and choose the BLA that should be accessed or start your favourite web
browser and type the given IP address as URL.