Bruker BEST, Руководство по установке

Страница: 13 / 29

Installation Manual Version 004 13 (29)
4
Software 4
General 4.1
The barcode reader must be setup in the TopSpin software before use. This pro-
cedure is described in this chapter.
Defining the Barcode Reader 4.2
Using the BEST-NMR Administration Toolbox select main menu item Hardware .
(see below).
To start the BEST-NMR Administration Toolbox , select one of the following possi-
bilities:
•
Type bestadm in the TopSpin command line and press enter.
or:
•
Type in iconnmr in the TopSpin command line.
•
Select ‘Configuration’ in the window that appears.
•
Click on ’Master Switches’ in the window that appears (left side).
•
Click on ‘Enable BEST-NMR’, followed by ‘BEST Administration Tool [be-
stadm]’ .
Figure 4.1. BEST-NMR Administration Toolbox
The window shown in Figure 4.2. will open.