BRUEL & KJAER LAN-XI, Руководство по установке

Страница: 8 / 20

6
CONNECTION AND SETUP
Connecting a LAN-XI Module to a Network
Using DHCP
LAN-XI modules are configured to use a DHCP server by default.
When the front end is a DHCP client, simply connect it to the network
and network settings will be supplied by the DHCP server.
If the module has been set to a static IP address via the module’s
home page, you must reset the module to be a DHCP client:
1) Press and release the Control button on the front of the module
to display the menu
2) Scroll down the menu by pressing the button once for each menu
item.
3) Press and hold the Control button for 5 seconds while the cursor
is on ‘LAN reset’ in the display menu.
Using a Static IP
To assign the module a static IP, first connect the module directly to
the computer or through a DHCP network as explained above. Open
the LAN-XI module’s web page, by typing the IP address from the
front of the module into your web browser, and follow these steps:
1) Click Network .
2) Select Static .
3) Enter an IP address, and, if necessary, a mask and gateway.
4) Click Save changes .
The module now has a static IP.
Alternatively, use the Front-End Setup program, which works also if the
current IP address is not with your existing address range.