Copyright © BRT Systems Pte Ltd
6
LDSBus IR Blaster Datasheet Blaster Datasheet
Version 1.1
Document Reference No.: BRTSYS_000003 Clearance No.: BRTSYS#004
5
Configuration, Installation and Application
to access the LDSBus Configuration Utility guide on how to
configure the device name, device address and termination settings before using it for your specific
application.
5.1
Connection Diagram
Figure 3 illustrates the connection of the LDSBus IR Blaster (LDSBus Device) to the LDS Bus. Please visit
to view the full device application, setup and installation guides.
Setup Instructions:
1.
Connect the first LDSBus HVT-Junction to any of the LDSBus Host Systems using a RJ45 (CAT5e)
cable.
2.
Connect the configured LDSBus IR Blaster to the LDSBus HVT-Junction as shown in Figure 3.
3.
If there is more than one LDSBus HVT-Junction, chain them together as shown in Figure 3.
Figure 3
–
LDSBus IR Blaster to LDS Bus
–
Connection Diagram
