BRP Ski-Doo 1200 4-TEC 2018, Руководство оператора, Страница: 118 / 211

MAINTENANCE SCHEDULE
EVERY 3 000 KM (2,000 MI) OR EVERY YEAR AT PRESEASON
(WHICHEVER COMES FIRST)
Adjust and align track
Inspect rear suspension (including stopper straps and slider shoes)
Lubricate rear suspension (lubricate whenever the vehicle is used in wet conditions
(rain, puddles))
Inspect fuel lines and connections
Inspect front suspension
Inspect tie-rod ends and alignment
Adjust headlight beam aiming
EVERY 6 000 KM (4,000 MI) OR AT PRE-SEASON (WHICHEVER COMES FIRST)
Change engine oil and filter ( ACE and 1200 4-TEC )
EVERY 6 000 KM (4,000 MI) OR 2 YEARS (WHICHEVER COMES FIRST)
Inspect fuel pump strainer and replace if necessary ( E-TEC )
Replace brake fluid
Clean and lubricate rewind starter
Inspect throttle cable ( E-TEC )
Replace fuel pump outlet filter ( ACE and 1200 4-TEC)
Inspect engine rubber mounts
Adjust engine stopper ( E-TEC )
Replace the following drive pulley wear parts: slider shoes, O-rings and sliding sheave
bushing (
E-TEC )
EVERY 10 000 KM (6,000 MI) OR 3 YEARS (WHICHEVER COMES FIRST)
Replace spark plugs
Inspect oil injection pump strainer and clean if needed ( E-TEC )
Replace the following drive pulley wear parts: spring cover bushing and ramps ( E-TEC )
Clean 3D rave valves
EVERY 5 YEARS
Replace engine coolant
Replace in-line fuel filter ( E-TEC )
116
______________