BRP Lynx Commander 800R E-TEC 2018, Руководство оператора

Страница: 48 / 118

CONTROLS, INSTRUMENTS AND STANDARD EQUIPMENT
CAUTION When closing lid
with the passenger seat installed,
secure with the retaining strap.
NOTE: A distinctive snap will be felt.
Double check that the seat is secure by
giving it a tug to confirm proper latch-
ing.
WARNING
Make sure seat is securely latched
before riding.
14) Passengers Handholds
Fixed handholds on each side of the
passenger seat.
fmo2012-003-020_a
TYPICAL
1. Passenger handhold
15) Mountain Strap
The mountain strap provides a grip for
the driver when side-hilling.
WARNING
This strap is not for towing, lifting
or other purpose than temporary
use as a grab handle when a lever-
age is needed at very low speeds.
16) Storage Compartment
The storage compartment is located
underneath the passenger seat.
WARNING
The storage compartment must
be properly latched and must not
contain any sharp or breakable ob-
jects.
To open the lid,
– Unhook the passenger seat safety
strap
– Pull and hold the rubber tab side-
ways
– Lift the RH side of the lid.
619900929-004_a
1. Passenger seat safety strap
2. Rubber tab
To close lid, push it down until it
latches.
Hook the passenger seat safety strap
to the rear bumper as shown.
CAUTION When closing lid
with the passenger seat installed,
secure with the retaining strap.
The battery and various equipment are
located in the storage compartment.
For details on the equipment, refer to
SPECIAL EQUIPMENT
.
Battery
To access the battery, push battery
cover notches both sides of cover and
remove it
_______________
45