ADJUSTMENTS
tbl2013-009-022_b
FRONT SUSPENSION — X RS MODELS
1. Preload adjustment
2. Low speed and high speed compression damping adjuster
3. Rebound adjuster
tbl2013-009-026_b
REAR SUSPENSION — BASE MODELS
1. Preload adjustment
2. Compression damping clicker
tbl2013-009-027_b
REAR SUSPENSION — X RS MODELS
1. Preload adjustment
2. Low speed and high speed compression damping adjuster
3. Rebound adjuster
Suspension Factory Settings
For adjustment procedures, refer to
SPRING
PRELOAD ADJUSTMENT (FRONT AND REAR)
and
SHOCK DAMPING ADJUSTMENTS (FRONT
AND REAR)
in this section.
To adjust compression and rebound to factory set-
tings, proceed as follows:
1. Turn adjuster clockwise until it stops.
2. Turn adjuster counterclockwise by the specified
amount, see table below.
FRONT SUSPENSION FACTORY SETTINGS
ADJUSTMENT
MODEL
FACTORY SETTING
Base
78.3 mm (3.08 in)
Spring preload
X rs DPS
103 mm (4.05 in)
Compression damping
Base
12 positions
Compression damping
(low speed)
X rs DPS
9 positions
Compression damping
(high speed)
X rs DPS
9 positions
Rebound damping
X rs DPS
12 positions
26 / 34
2014-1
PREDELIVERY
