BRP Can-Am 450 Series Скачать руководство пользователя страница 68 | Manualshive

Страница: 68 / 196

BRP Can-Am 450 Series Скачать руководство пользователя страница 68

V MOVING LOADS AND DOING WORK

MAXIMUM HAULING CAPACITY

TRAILER

LOAD

ALLOWED

TONGUE

WEIGHT

ALLOWED

NOTE

590 kg

(1,300 lb)

59 kg (130 lb)

Trailer
without
brakes

Includes trailer and trailer load.
Ensure to properly load the trailer so
that tongue is always pushing on hitch
support and not pulling on hitch ball.

750 kg

(1,654 lb)

75 kg (165 lb)

Trailer
with
brakes

Includes trailer and trailer load.
Ensure to properly load the trailer so
that tongue is always pushing on hitch
support and not pulling on hitch ball.

NOTE: Includes trailer and trailer load. Ensure to properly load the trailer so that tongue
is always pushing on hitch support and not pulling on hitch ball.

WARNING

Stay clear from the area between tractor and trailed vehicle.

WARNING

Strictly follow the instructions outlined in the operator' s manual of the
mounted or trailed machinery or trailer, and not to operate the combina-
tion tractor - machine or tractor - trailer unless all instructions have been
followed.

66

_______

A) SAFETY INFORMATION

_______

«
...
66
67
68
69
70
...
»

Содержание Can-Am 450 Series





































































































































































































Отзывы:

Нет отзывов