Install dome light with two (2) screws
1. Dome light
2. Screws
Route dome light harness along the groove until the rectangular area. Secure the harness along the way as deemed necessary. Use
the transverse areas to pass locking tie and secure harness. Do not tighten locking ties.
Rectangular area is for the excess harness and to join the connectors.
1. Dome light harness
2. Locking Ties
3. Connectors
Close coolant tank access cover.
Follow normal instruction to install the All-Terrain Trunk Cover Kit.
Inside the cargo cover [P1] joint the connectors at the rectangular area.
Secure all harness and tighten all locking ties.
Reconnect battery.
NOTICE Connect RED cable (+) first then BLACK cable (-) .
Verify lights are functioning properly.
Reinstall all removed parts in the inverse order.
NOTICE Make sure power cable does not come into contact with any sharp edges, mobile parts and hot surfaces
before securing it in place.
SAFETY LABEL
This product comes with the following label containing important safety information.
The label should be considered a permanent part of this product. If the label come off or become hard to read, please contact an
authorized dealer for FREE OF CHARGE replacement.
Any person who intend to use this product should read and understand the information contained on the label before doing so.
about:blank
14 of 15
10/27/2017, 1:15 PM
