Broyhill 810566184, Руководство по сборке

Страница: 15 / 17

Hardware needed
x4
x2
x2
x4
Not included
Attach the Anti-tipping Strips (15) to the back top of the mantel
with Screw (17) and Flat Washer (3). With assistance, place the
console in the desired location and mark the wall just below the
spot where the Aniti-tipping Strips are attached to the console.
Remove the console.
Drill holes in the marked locations on the wall and insert the Wall
Anchor (16). Place the console back into position leaving room to
attach the Anti-tipping Strips (15) to the Wall Anchor (16) with
Screw (17) and Flat Washer (3). Fully tighten screws.
Move the console tight against the wall.
NOTE: Please insure any media equipment is plugged in and
working correctly before securing the Anti-tipping Strips to the Wall
Anchors.
STEP 10
NOT INCLUDED NOT INCLUDED
WALL
WALL
WALL
Page 14 of 16
Assembled View:
WALL
15
3
16 17
15
17
3
16
3
17
15