Brownie’s YP45DF Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 59

Brownie’s YP45DF Скачать руководство пользователя страница 17

17

INTAKE FILTER

The intake filter is a dry micronic filter used to filter the intake air.

Filter Maintenance:

Filter cartridge must be changed at regular intervals
according to maintenance schedule on page 12.

• Remove knurled nut (1) and take off plastic cap

(2). Remove filter cartridge (3) and clean with a
brush or by blowing air from the inside to out.

• Turn the cartridge 90º when replacing. Replace the

dirty cartridge once it has been turned three times
and been used through the full system.

• Clean filter housing inside with a damp cloth. Take

care to prevent dust from entering the intake pipe.

• Replace o-ring (4) if damaged.

OIL LEVEL CHECK

Check oil level daily prior to operating compressor. Use the
dipstick and a lint free cloth to check the oil, by wiping off oil
several times. Note that the oil level must be between the
minimum and maximum dipstick notches.

Add oil if necessary and recheck level. Oil should not exceed
the maximum level, as this could result in valves sooting up.

OIL TYPES

Using the correct oil is of utmost importance for proper care and
maintenance of the compressor, along with keeping the life and function of your compressor at its best.

Only use oils that:

• are low in deposits
• have no carbonizing effect, especially in the valves
• have good anti-corrosive properties
• provide emulsification of the condensate in the crankcase
• are physiologically and toxicologically suitable

Due to the thermal load on the compressor, only high quality oil should be used. You are recommended to restrict
oils to those which have been approved by the manufacturer and are in our list of oils (see page 11).

Synthetic Lube Oils

For operating under severe conditions such as continuous running and/or higher ambient temperatures, we
recommend Part No. CF-2000 (Synthetic Compressor Lubricant, Food Grade). CF-2000 has been specially
formulated for use in high pressure compressors and will provide optimal performance through a wide range of
conditions.

NOTE

: The compressor systems are delivered with one liter of natural oil, Part No. BTLHPN-25.

«
...
15
16
17
18
19
...
»

Содержание YP45DF




























































Отзывы:

Нет отзывов