BROWN TCF-2600, Руководство владельца и оператора

Страница: 30 / 60

30
THE TEN COMMANDMENTS OF OPERATION
1. NEvER - Operate this or any other equipment without reading and under
standing the owners manual.
2. NEvER – Attach this product to a tractor that does not have suitable safety
equipment properly installed .
3. NEvER – Operate this equipment without all safety equipment properly in
stalled on this equipment.
4. NEVER – Start the cutting process without inspecting, walking, flagging or
removing all foreign material from job site.
5. NEvER – Allow any riders or bystanders within 300 feet of this unit during
operation.
6. NEVER – Operate this equipment until bolts, fasteners, fittings and oil levels
have been checked for operational status.
7. NEvER – Allow blades to make contact with rocks or stumps – unit was not
designed for this type of operation.
8. NEvER – Allow an untrained operator to operate this equipment.
9. NEvER – Install any parts that are not genuine Brown replacement parts.
10. NEvER – leave tractor seat until blades have stopped turning and all tractor
shut down procedures have been completed.
ThESE ARE ONly A FEW OF ThE SAFETy pROCEDURES ThAT MUST BE FOl-
lOWED TO INSURE ThE SAFE OpERATION OF ThIS EqUIpMENT – MANy OThER
SAFETy RElATED pOINTS ARE STATED ThROUghOUT ThIS MANUAl
WARNINg:
FAIlURE TO FOllOW ThE TEN COMMANDMENTS
CAN AND WIll CAUSE SERIOUS INJURy OR DEATh
IF yOU hAvE ANy SAFETy, MAINTENANCE OR OpERATIONAl qUESTIONS –
plEASE CAll ThE FACTORy BEFORE USINg ThIS EqUIpMENT – 1-800-633-8909