27
THE TEN COMMANDMENTS OF OPERATION
1. NEVER - Operate this or any other equipment without reading and
understanding the owners manual.
2. NEVER – Attach this product to a tractor that does not have suitable safety
equipment properly installed .
3. NEVER – Operate this equipment without all safety equipment properly in
stalled on this equipment.
4.
NEVER – Start the cutting process without inspecting, walking, flagging or
removing all foreign material from job site.
5. NEVER – Allow any riders or bystanders within 300 feet of this unit during
operation.
6.
NEVER – Operate this equipment until bolts, fasteners, fittings and oil
levels have been checked for operational status.
7. NEVER – Allow blades to make contact with rocks or stumps – unit was not
designed for this type of operation.
8. NEVER – Allow an untrained operator to operate this equipment.
9. NEVER – Install any parts that are not genuine Brown replacement parts.
10. NEVER – Leave tractor seat until blades have stopped turning and all
tractor shut down procedures have been completed.
THESE ARE ONLY A FEW OF THE SAFETY PROCEDURES THAT MUST BE
FOLLOWED TO INSURE THE SAFE OPERATION OF THIS EQUIPMENT – MANY
OTHER SAFETY RELATED POINTS ARE STATED THROUGHOUT THIS MANUAL
WARNING:
FAILURE TO FOLLOW THE TEN COMMANDMENTS
CAN AND WILL CAUSE SERIOUS INJURY OR DEATH
IF YOU HAVE ANY SAFETY, MAINTENANCE OR OPERATIONAL QUESTIONS –
PLEASE CALL THE FACTORY BEFORE USING THIS EQUIPMENT – 1-800-633-8909
