BROWN 410 Series, Руководство оператора

Страница: 21 / 44

21
Operation
Starting Cutter
Power for operating the cutter is supplied from the tractor PTO. Refer to your tractor manual for
instructions on engaging and disengaging the PTO.
Warning! Do not operate this cutter unless the tractor has a live, or independent, PTO. The
momentum created by the blade carrier can push the tractor forward unexpectedly.
Warning! Operate cutter only at the specified PTO RPM. Brown 410 Series cutters are designed
to operate at 540 RPM; however, a 1000 RPM design is an option.
Operating Speed
Proper operating speed for equipment will depend upon the height, density, and type of the material to
be cut. Regardless of chosen ground speed, always operate the PTO at the recommended RPM
when cutting.
General Operation
Warning! Avoid personal injury or death. Walk the area before operation begins. Remove or flag
all rocks and any other hazardous debris from site.
Observe the following guidelines when operating the cutter:
• Do not back the cutter into material, as this may bend
the cutter deck.
• Never lower the cutter onto material.
• Avoid tight turns near trees or stationary objects. The deck
may be damaged by side impact.
Remember: The safe operation of this equipment is the responsibility
of the operator. The operator should be familiar with both the tractor
and the equipment. The operator must read and understand all
applicable operator manuals and follow all safety practices.
Warning! Avoid personal injury or death. Never operate machine around bystanders. Always
maintain a distance of at least 300 feet.
DO NOT OPERATE THIS UNIT IF YOU ARE UNDER THE INFLUENCE OF ALCOHOL,
ILLEGAL DRUGS, OR ANY PRESCRIPTION OR OVER THE COUNTER MEDICATIONS
THAT COULD CAUSE DROWSINESS, DIZZINESS, DISORIENTATION AND/OR IMPAIR
YOUR ABILITY IN ANY WAY TO SAFELY OPERATE THE UNIT.
DO NOT OPERATE THIS UNIT IF YOU SUFFER FROM ANY PHYSICAL CONDITON OR
DISABILITY THAT WOULD IMPAIR YOUR ABILITY TO OPERATE IT SAFELY.