4
Use:
1. Designed for use with iOS 7.0 or later & Android 4.0 or later.
2.
Download the thermometer “BBQ-SENSE” app from the iTunes store or Google Play store.
3. Turn Bluetooth mode on, start the application and
click “Search” to connect the thermometer
with the device via Bluetooth. It may be impossible to connect with the thermometer directly
from the phone settings.
4. Configure the thermometer through the application.
*In case of new model of smart phones, it may be necessary to grant access to location of the
device for proper functioning.
Safety Warnings:
1. The stainless-steel probe and wires will get hot. Take care when removing.
2. Keep the probe and wires away from children.
3. Do not use probe in a microwave oven.
4. Do not expose the thermometer base to direct heat.
Cleaning:
After each use, the sensor and cable should be wiped with a damp cloth and then dried
thoroughly. The sensor and the thermometer base should not be immersed in water. To avoid
damage, do not use detergents or abrasive cleaners.
Tolerance (range):
+/-
1°C (0°C … +100°C)
+/-
2°C (-20°C … 0°C and +100°C … +150°C)
+/-
3°C (-30°C … -20°C and +150°C … +200°C)
+/-
5°C (+200°C … +250°C)
When the temperature on the probes stays for a period
of 10 minutes below 40°C, the
thermometer will automatically switch off to save the battery.
Erroneous indications of the device (incorrect temperature values, “HHH” message) mean that
the probe has been damaged, which is why it is necessary to pay attention to using it properly:
•
do not wash the probe under running water
•
only the measuring element of the probe can be immersed in liquid - the cables must not
come in contact with it
Not adhering to the above recommendations may lead to irreversible damage to the probe and
result in voiding the warranty.
