Browan WAPS-232N LW, Руководство по установке

Страница: 26 / 35

© 2020 BROWAN COMMUNICATIONS INC.
25
Chapter 3 Gateway Installation Reference
Subject to different environments, the Gateway should be installed in specialized manners.
Installation can be roughly divided into two types: wall-mount installation and base-mount
installation. In general, wall-mount installation is the preferable choice since wall-mount
installations are less likely to result in a water leak in the roof (you need to make sure there are no
water pipes inside the wall and that there are no water towers above the wall) and this type of
installation is relatively less expensive. However, in order to make the right choice, the physical
presence of a construction professional and the owner of the building are required in order to
evaluate and draw the final decision.
In addition, please note
1. Network cables should not be longer than 100(m). The location of the Gateway will
affect the length of the network cable.
2. The height of the antenna must not exceed the 45 degrees cone of protection from the
lightning rod.
3. A certain level of attenuation will exist on the RF Cable
4. Waterproof measures must be applied to the installation site.
5. Please ensure that there are no obstacles blocking the antenna and that the antenna is
in a vertical state.
6. The way the gateway is installed should make it easy to maintain
7. The gateway, lightning surge arresters, and other relative equipment must be properly
grounded.