BW1257 User Guide
Page 12 of 28
This chapter describes how BW1257 is configured via Web Interface.
How to Log In
1. Use the enclosed Ethernet patch cable to connect the ETH port of the Access
Point to your laptop/PC.
2. Configure your laptop/PC network as follows:
IP address: 192.168.2.10
Netmask: 255.255.255.0
Gateway: 192.168.2.2
3. Open browser (eg. IE, Chrome)
4. Enter Access Point IP address in the browser (
http://192.168.2.2
) to log into the
system.
5. The default administrator user name and password are as follows:
Administrator: admin
Password: admin01
Figure 7 – Log Into AP Web Interface
BW1257 can accept power from either DC12V or PoE (Power-over-
Ethernet) according to 802.3at standard. The maximum power
consumption is 25 watts.
The default network is DHCP client. BW1257 has another fixed IP
address of 192.168.2.2 for management purposes.
Chapter 3 – Reference Manual
