TOMATO MILL:
1. Motor 7. Funnel
2. Switch 8. Shaft
3. Turning knob 9. Feed screw
4. Attachment opening 10. Conical filter
5. Adapter 11. Catch container
6. Stamper
ASSEMBLY:
In order to avoid all risks, any intervention must always be carried out after you have made sure that
the plug has been removed from the mains socket.
The tomato grinder is partially mounted in the housing. Before using the grinder, loosen the conical
filter (10) from the adapter (5), by turning it in a clockwise direction, and remove feed screw (9) and
the shaft (8). Clean and thoroughly dry all separate parts, using a non-aggressive detergent. Assemble
the tomato grinder. Inserted the adapter (5) in the attachment hole (4) of the motor, by turning it
carefully until it is firmly attached. Lock the adapter by turning the knob (3) in a clockwise direction.
Attach the shaft (8) and make sure that it touches the backside of the adapter. Now insert the feed
screw (9) in the adapter (5), and attach it firmly by turning the conical filter (10) in a counter-
clockwise direction. Mount the funnel (7). Firmly insert the small catch tray (11) in the adapter and in
the conical filter. Use the provided attachment hooks for this purpose. The ventilation holes of the
motor (1) may never be blocked, so that the motor is always sufficiently ventilated. The operating life
of the machine can be substantial reduced if these holes are blocked.
Brouwland
Korspelsesteenweg 86 • B-3581 Beverlo - Belgium
Tel. +32-(0)11-40.14.08 • Fax. +32-(0)11-34.73.59
[email protected] • www.brouwland.com
Manual
015.255.3 Tomato-berry mill Artus 250
3 / 4
