Brouwer RoboMax, Руководство оператора

Страница: 27 / 84

CONTROLS
Active Stacking screen
The Active Stacking Screen is displayed during the
stacking sequence.
•
Press Pad ‘ 1 ’ ( stop ), to stop the stack-
ing sequence, and display the Inactive Stacking
Screen.
•
Press and hold, for three seconds, Pad ‘ 3 ’, ( reset
pallet counter ) to reset the counter to zero.
•
Press Pad ‘ 4 ’ ( roll eject ), to activate the
‘bad roll’ ejection.
•
Press Pad ‘ 8 ’ ( roll adv .), to advance the
Index Conveyor one position.
•
Press the ‘UP’ Arrow Pad ‘ A ‘( add ), to increase
the sod roll diameter in increments of 0.10 inch.
•
Press the ‘DOWN’ Arrow Pad ‘ B ’ ( sub ), to de-
crease the sod roll diameter in increments of
0.10 in
•
Press the ‘OK’ Pad ‘ C ’ ( diag .), to display the
Diagnostic Screen.
Step Sequence Screen
The Step Sequence Screen is displayed when the
Step Sequence Pad ‘ OK ’, on the Inactive Stacking
Screen is Pressed .
•
Press Pad ‘ 1 ’ ( OK ), to return to the
Inactive Stacking Screen.
•
Press the ‘ Left Arrow Pad ’ ‘ D ( prev .) to re-
move five sod rolls from the pallet display.
•
Press the ‘ Right Arrow Pad ’ ‘ E ’ ( next ), to
add five sod rolls to the pallet display.
•
Press the ‘ UP ’ Arrow Pad ‘ F ’ ( plus ) to add
sod rolls to the Index Conveyor Count.
•
Press the ‘ DOWN ’ Arrow Pad ‘ G ’ ( minus ) to
subtract sod rolls from the Index Conveyor
Count.
2-05