Brother TD-2020A, Руководство пользователя

Страница: 94 / 98

Chapter 11
88
c
Insert the Media Roll so that the labels
feed with the side to be printed on facing
up (1), as shown.
d
While lifting the media guide adjustment
lever (1), push in both media guides (2)
to fit the width of the paper.
e
Feed the end of the Media Roll under
the media tip guides (1).

Use Media Rolls with a maximum
outer dimension of 5" (127 mm) or
less. Use Media Rolls designed for
TD series printers. Regardless of
the size, some Media Rolls may not
be usable.
 Insert the Media Roll facing the
correct direction. If the Media Roll is
not inserted correctly, the printer will
not print on the correct side of the
paper or label.
 When using media with the labels
rolled up on the inside, insert the roll
in the opposite direction of that
shown in step
c
so that the print
side of the labels will face up.
1
1
2
1