Ten years*1
(wh)
The industry's most efficient
energy savings
A significant reduction
of lubrication oil consumption
Operation rate: 50%
A new motor has been developed specifically for the S-7200C.
The power consumption of the machine is approximately 50%
less than that with the V-belt driven system (with an AC servo
motor) and approximately 12% less than that of the S-7200B.
This direct drive sewing machine offers the best energy
saving in the industry.
The industry's most efficient energy savings
With the safety sensor detecting, the motor does not start
while the machine head is tilted back, even when the treadle
is depressed.
Considerate of safe maintenance
The amount of oil in the gearbox can be checked visually.
The gearbox has a heat-discharging structure with a fin.
The gearbox oil amount can be checked at one view
Further increased duration of the grease
Brother has established its original
"
Brother Green Label
"
for the products, in conformity
with ISO 14021 and JIS Q14021. The S-7200C is certified as an environment-conscious
sewing machine according to the
"
Brother Green Label
"
standard. The machine is
compliant with the RoHS Directive *2 and the WEEE Directive *3. The use of the
restricted substances such as lead, cadmium, hexavalent chromium is absolutely within
the regulation values. Brother has been providing all its products in accordance with the
RoHS Directive for all market areas (excluding machine tools).
*2. The RoHS Directive (the restriction of the use of certain hazardous substances in electrical and electronic
equipment) came into effect in the EU in July 2006.
*3. The WEEE Directive (imposing the responsibility to collect and recycle waste electrical and electronic equipment
on the manufacturers) came into effect in the EU in August 2005.
Environment-conscious
S-7200C
Single needle direct drive straight lock stitcher with thread trimmer
Comparison of
power consumption
AC servo motor
S-7200C
Greasing Interval
S-7200C
S-7200B
S-7200A
50%
reduction
About
2 times
longer than
S-7200B
*1. Greasing maintenance will only be required
once in about ten years under the following
condition: operating days per year: 300 days,
operating time per day: 10 hours, operation rate:
16%, sewing speed: 4,000 rpm.
The duration of the grease that is
necessary for the dry head has been
extended to about double that of the
S-7200B and about six times that of the
S-7200A. The integrated cutting-edge
dry head technology significantly
increases the grease duration.
