manualshive.com logo in svg

Brother S-6200A, Инструкция по эксплуатации, Страница: 24 / 72

Поделиться
Скачать
Brother S-6200A Скачать руководство пользователя страница 24

 

 

S-6200A 

4.

㩷

PREPARATION BEFORE SEWING

㩷

17 

4-3. Winding the lower thread 

         

CAUTION 

 

Do not touch any of the moving parts or press any objects against the machine while winding the lower thread, as 
this may result in personal injury or damage to the machine. 

 

1.  Turn on the power switch. 
2.  Place the bobbin (1) onto the bobbin winder shaft (2). 
3.  Wind the thread several times around the bobbin (1) in 

the direction indicated by the arrow. 

4.  Push the bobbin presser arm (3) toward the bobbin(1). 
5.  Raise the presser foot with the lifting lever. 
6.  Depress the treadle. Lower thread winding will then start. 
7. Once winding of the lower thread is completed, the 

bobbin presser arm (3) will return automatically. 

8.  After the thread has been wound on, remove the bobbin 

and cut the thread with the knife (4).

 

* The method of threading differs for normal thread and 

polyester thread. Refer to the illustration.

 

 
 
 
 
 
 
 
 
 
 
 
 

* Loosen the screw (5) and move the bobbin presser (6) to 

adjust the amount of thread wound onto the bobbin. 

NOTE: 

The amount of thread wound onto the bobbin should 
be a maximum of 80 % of the bobbin capacity.

 

 

 
 
 
 
 
 

 

 

 

 

 

 

 

 

4154M 2124M

1969B

<Normal thread> 

<Polyester thread> 

Less thread

More thread 

Содержание S-6200A









































































Отзывы:

Нет отзывов