46
Error Message List
Label files saved
previously are now empty.
Have the batteries and AC adapter
been disconnected?
All files stored in the internal
memory are lost if the batteries and
AC adapter are disconnected for
longer than two minutes.
Is there enough power remaining in
the batteries?
All data stored in the internal
memory is lost if the batteries
become empty or the AC adapter is
disconnected.
Have you used the Reset function?
The resetting function clears all
data stored in the internal memory,
including label files.
Error Message
Cause
Solution
1 BLOCK LIMIT!
• This message appears if you
try to use the Numbering
function when multiple
blocks of text have been
entered with the
PANEL1
Label Type mode selected.
• Cancel the Numbering
function.
• Limit the number of text
blocks to 1.
CHECK # OF
DIGITS ENTERED!
• This message appears if less
than the minimum one digit
are entered as the bar code
data.
• Enter a minimum of one
digit before pressing
n
.
• This message appears if the
required number of digits are
not entered in the bar code
data.
• Input the correct number of
digits or change the bar code
protocol.
50 LINE LIMIT
REACHED!
• This message appears if 50
lines have already been
entered when you press
g
, then
n
.
• Limit the number of lines to
50.
7 LINE LIMIT!
• This message appears if 7
lines have already been
entered in a text block when
you press
n
.
• Limit the number of lines in
a text block to 7.
• This message appears if you
delete
, causing the
number of lines in a block to
exceed the 7-line limit.
• Adjust the number of lines
so that the block will not
have more than 7 lines.
Problem
Cause
Solution
PT2470uk.book Page 46 Friday, August 20, 2010 3:14 PM
