Brother PR-620, Руководство по эксплуатации

Страница: 39 / 237

EMBROIDERING TUTORIAL ———————————————————————————————————————————————————
22
Screen overview
The basic operation flow is shown below.
In the pattern type selection screen , select
a pattern type. (Refer to page 23, 50)
1 Touch this key to continue to the pattern
editing screen . This key is not available
unless a pattern type is selected.
In the embroidering settings screen , if it is a
combined pattern , edit the entire pattern, specify the
embroidering settings and check the embroidery area.
(Refer to page 26, 54)
1 Touch this key to quit the current operation
and return to the
pattern type selection
screen .
2 Touch this key to return to the pattern editing
screen .
3 Touch this key to continue to the embroidering
screen .
In the pattern editing screen , edit the
pattern. (Refer to page 25, 52)
1 Touch this key to return to the pattern type
selection screen and add another pattern.
2 Touch this key to continue to the
embroidering settings screen .
In the pattern list screen , select the
pattern. (Refer to page 23, 51)
1 Touch this key to return to the pattern type
selection screen .
2 Touch this key to continue to the pattern
editing screen .
In the embroidering screen , check the thread
colors assigned to the needle bars, and then install
the upper threads.Touch the unlock key so
that the start/stop button starts flashing in green and
the embroidery machine is ready to begin sewing.
After the embroidery is sewn, the
embroidering
settings screen appears. (Refer to page 33, 56)
1 Touch this key to return to the embroidering
settings screen .
Sapphire_brother.book Page 22 Thursday, November 17, 2005 2:48 PM